040893 FK KFK PM/SCM/TL: Supply Chain Management (2016S)
Continuous assessment of course work
Labels
The course language is English.Only students who signed up for the class in univis/u:space are allowed to take the class (that means, that you have to at least be on the waiting list if you want to take this class). No exceptions possible.
Registration/Deregistration
Note: The time of your registration within the registration period has no effect on the allocation of places (no first come, first served).
- Registration is open from We 17.02.2016 09:00 to We 24.02.2016 12:00
- Deregistration possible until Mo 14.03.2016 23:59
Details
max. 50 participants
Language: English
Lecturers
Classes (iCal) - next class is marked with N
Attendance in the first session is mandatory. All students who are not present during the first session will be dropped from class if they did not excuse in advance via e-Mail. All students who confirmed their participation during the first session will be graded. The midterm exam will presumably take place from 09:45 to 11:15 on Tuesday, May 3, 2016 in room HS 6. The final exam will presumably take place from 09:45 to 11:15 on Tuesday, June 28, 2016 in room HS 14. The case study presentations will presumably take place on Tuesday, June 21, 2016 (13:15-14:45) and on Tuesday, June 28, 2016 (13:15-14:45).
- Tuesday 01.03. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 01.03. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 08.03. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 08.03. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 15.03. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 15.03. 11:30 - 12:30 PC-Seminarraum 3 Oskar-Morgenstern-Platz 1 1.Untergeschoß
- Tuesday 15.03. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 05.04. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 05.04. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 12.04. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 12.04. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 19.04. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 19.04. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 26.04. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 26.04. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
-
Tuesday
03.05.
09:45 - 11:15
Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
Hörsaal 6 Oskar-Morgenstern-Platz 1 1.Stock - Tuesday 03.05. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 03.05. 15:00 - 16:30 PC-Seminarraum 1 Oskar-Morgenstern-Platz 1 1.Untergeschoß
- Tuesday 10.05. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 10.05. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 24.05. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 24.05. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 31.05. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 31.05. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 07.06. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 07.06. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 14.06. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 14.06. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 21.06. 09:45 - 11:15 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
- Tuesday 21.06. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
-
Tuesday
28.06.
09:45 - 11:15
Hörsaal 14 Oskar-Morgenstern-Platz 1 2.Stock
Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock - Tuesday 28.06. 13:15 - 14:45 Hörsaal 15 Oskar-Morgenstern-Platz 1 2.Stock
Information
Aims, contents and method of the course
Supply Chain Management (SCM) is the efficient management of the set of often autonomous parties involved in the design of new products and services, procuring raw materials, transforming them into semi-finished and finished products, and delivery to the end customer. This course is the base module for the Supply Chain Management specialization (KFK) and is recommended to be taken prior to other modules of the KFK.
Assessment and permitted materials
A total of 100% can be obtained by:
- homework assignments (20%; students MUST be present in class and prepared to present the exercises in class upon request)
- a term project performed in groups of 2 students (5% for the written part; 5% for the oral presentation in class)
- a written midterm exam (30%; no course material allowed)
- a written final exam (40%; no course material allowed)At least 50% have to be obtained for a positive grade. The other grades are distributed as follows:
4: 50% to <63%
3: 63% to <75%
2: 75% to <88%
1: 88% to 100%Cheating during an examination will be sanctioned according to the university's constitution in its current form (i.e., the entire course will not be graded but marked as cheated and counted as one attempt). Signing for another student will be counted as cheating as well (also during homework sessions).Students who want to take part in an exam are required to bring their student ID. Otherwise, they will be asked to go to the secretary's office to make a copy of the alternative ID (driver's licence, passport, etc.). Non-official IDs (bank cards, Vorteilscards, etc.) will NOT be accepted without any exceptions. This procedure will not extend the duration of the examination.The students' IDs will be checked only after handing out the examination sheets. Students who are not on the list or don't have a valid identification card will not be allowed to participate in the examination even if they were already handed an examination sheet.
- homework assignments (20%; students MUST be present in class and prepared to present the exercises in class upon request)
- a term project performed in groups of 2 students (5% for the written part; 5% for the oral presentation in class)
- a written midterm exam (30%; no course material allowed)
- a written final exam (40%; no course material allowed)At least 50% have to be obtained for a positive grade. The other grades are distributed as follows:
4: 50% to <63%
3: 63% to <75%
2: 75% to <88%
1: 88% to 100%Cheating during an examination will be sanctioned according to the university's constitution in its current form (i.e., the entire course will not be graded but marked as cheated and counted as one attempt). Signing for another student will be counted as cheating as well (also during homework sessions).Students who want to take part in an exam are required to bring their student ID. Otherwise, they will be asked to go to the secretary's office to make a copy of the alternative ID (driver's licence, passport, etc.). Non-official IDs (bank cards, Vorteilscards, etc.) will NOT be accepted without any exceptions. This procedure will not extend the duration of the examination.The students' IDs will be checked only after handing out the examination sheets. Students who are not on the list or don't have a valid identification card will not be allowed to participate in the examination even if they were already handed an examination sheet.
Minimum requirements and assessment criteria
The objective is to get an overview of the basic problems, concepts and technologies of supply chain management and learn decision support techniques to make decisions in centralized and decentralized value chains.
Examination topics
The course consists of a sequence of lectures, exercise classes, case studies and business games. The famous MIT beer game will be played in class to motivate essential information and incentive problems in supply chains. Further, the participants will learn how to model and analyse supply chain design and control problems using quantitative methods. Basic concepts will be illustrated using Excel-sheets. Additionally, an introductory excel tutorial will be offered.
Reading list
- Chopra, S., Meindl, P. (2010), Supply Chain Management, 5th edition, Prentice Hall
- Cachon, G., Terwiesch, C. (2009), Matching Supply with Demand, 3rd edition, McGraw-Hill
- Simchi-Levi, D., Kaminsky, P., Simchi-Levi, E. (2008), Designing and Managing the Supply Chain: Concepts, Strategies and Case Studies, 3rd edition, McGraw-Hill
- Dixit, A. K. and Pindyck, R. S., Investment under Uncertainty, Princeton University Press, 1994
- Cachon, G., Terwiesch, C. (2009), Matching Supply with Demand, 3rd edition, McGraw-Hill
- Simchi-Levi, D., Kaminsky, P., Simchi-Levi, E. (2008), Designing and Managing the Supply Chain: Concepts, Strategies and Case Studies, 3rd edition, McGraw-Hill
- Dixit, A. K. and Pindyck, R. S., Investment under Uncertainty, Princeton University Press, 1994
Association in the course directory
Last modified: Mo 07.09.2020 15:29